Basler L800k, User Manual, Page: 19 / 168

Camera Interface
BASLER L800
k
2-3
Draft
6-Pin Micro-miniature Receptacle Pin Assignments
The pin assignments for the 6-pin, micro-miniature receptacle on the back of the camera are
shown in Table 2-2.
Pin
Number
Signal
Name
Direction Level Function
1, 2
1 12 V In Input +12 VDC Camera Power Input
3 Not Connected
4 Not Connected
5, 6
2
DC Gnd
Input Ground DC Ground
1
Pins 1 and 2 are tied together inside of the camera.
2
Pins 5 and 6 are tied together inside of the camera.
Table 2-2: Pin Assignments for the 6-pin Micro-miniature Receptacle
Caution!
Be sure that all power to your system is switched off before you make or break
connections to the camera. Making or breaking connections when power is on
can result in damage to the camera.
The camera is not protected for reverse voltage. If reverse voltage is applied to
the camera while it is connected to a frame grabber in a PC, the camera could
be seriously damaged.
The camera has overvoltage protection, but we do not recommend applying an
input voltage greater than 13.2 VDC. If an input voltage greater than 14.5 VDC
is applied to the camera, the camera will automatically switch off the internal
power applied to the CCD sensor so that the sensor will be protected. In this
situation, you will still be able to communicate with the camera and the camera
will still be able to transmit test images, however, no live images can be gener-
ated.
L
The camera housing is not grounded and is electrically isolated from the circuit
boards inside of the camera.