Basler BE2000E, Instruction Manual, Page: 63 / 82

9287500995 Rev B 55
Saving Settings Files
Saving BE2000E settings to a file for uploading to other BE2000E units saves setup time when
configuring multiple units to the same configuration. A settings file can also be created in BESTCOMS-
BE2000E without being connected to a BE2000E. The settings of the desired screens can be changed
and these settings can then be saved to a file. Once a settings file is created, it can be edited using any
text editing software, and then saved for uploading.
A settings file is created by clicking the save icon or by clicking File on the menu bar and then clicking
Save . When the file command is given, a dialog box asks if you want to save the current settings into a
BE2000E data file. Clicking Yes displays a Save As dialog box where the settings are assigned a file
name and then saved. All BE2000E settings files are automatically given a
*
.BE2 extension by
BESTCOMS-BE2000E.
Uploading Settings Files
A BE2000E settings file downloaded from a BE2000E or created within BESTCOMS-BE2000E can be
uploaded to multiple BE2000E units. Only a BE2000E settings file with a .BE2 extension can be uploaded
to a BE2000E unit. Before uploading a file, communication must be initiated with the BE2000E that is to
receive the settings. Refer to the paragraphs under the headings
Starting the BESTCOMS-BE2000E
Application.
Caution
Before uploading a settings file, remove operating power from the
BE2000E, disconnect the field wiring from terminals F+ and F
–,
and
reapply operating power to the BE2000E.
The upload process is started by clicking the open icon or clicking File on the menu bar and then clicking
Open . A dialog box is then displayed (Figure 38) reminding you that the BE2000E should be off-line
before uploading settings. Clicking Yes loads the settings into BE2000E memory.
Figure 38. Settings Upload Dialog Box
Password Protection
Password protection guards against unauthorized changing or viewing of BE2000E settings. A single
password protects all BE2000E settings. The BE2000E is delivered with a default password of
OEM .
Changing the password provides security against unauthorized changes to settings. Once changed, the
password should be stored in a secure location. If the user-defined password is lost or forgotten,
BESTCOMS-BE2000E must be reloaded to restore the default password.
Changing the Password
Note
A password change can be made only after communication between
BESTCOMS-BE2000E and the BE2000E is established.
BE2000E BESTCOMS
™
Software