Basler BE1-51C, Instruction Manual, Page: 65 / 66

8-1
SECTION 8
MANUAL CHANGE INFORMATION
SUMMARY AND CROSS REFERENCE GUIDE
This section contains information concerning the previous editions of the manual. The substantive
changes to date are summarized in the Table 8-1.
REV ECA Summary of Changes
A 10/90 Subsection added on page 3-4 entitled Instantaneous and Command Close Op-
tions. Tables in Section 4 and 5 revised. Added Register Overview, page 6-2;
Troubleshooting and Timekeeping, page 7-2. General Editorial revisions.
B 06/92 All Sections of the manual have been revised to upgrade the relay to Version 1.6.
C 11/94 Changed Software Revision from 3.40 to 3.46. Page 1-7,
Specifications, corrected
K = (500 A or 5 times TAP)
2
to K = (500 A or 50 times TAP)
2
. Deleted old Table 1-
1
Current Sensing Burden and replaced with Burden is less than 0.1 ohm.
Changed Table 1-2 to Table 1-1. Changed
Isolation specifications to current stan-
dards. Corrected Figure Titles 1-2 and 1-3. Section 3, changed paragraph
Loss-
of-Power Sensing to reflect changes in the relay software. Section 4, corrected
Table 4-1,
Display Sequence 11 and 12. Section 5, deleted references to Register
Number 6. Corrected Register Number 58,
Description. Corrected Figure 5-1 to
show communication port wiring. Section 6, changed
Dielectric Test to current
standards.