![background image](http://html1.mh-extra.com/html/bartscher/nt-501/nt-501_instruction-manual_4166562047.webp)
- 43 -
7. Possible Malfunctions
In case of any malfunction, disconnect the device from the power supply.
Based on the table below, check whether it is possible to remove defects without
notifying a customer service point or contacting the sales agent.
PROBLEM
CAUSE
SOLUTION
The device is switched on.
The control light is not lit
and the device is not
heating up.
•
No power supply.
•
Damaged temperature
regulator.
•
Check the power supply
and the connection cable.
•
Contact the sales agent.
Temperature is set, the
control light is lit, but the
device is not heating up.
•
Damaged heating
element.
•
Contact the sales agent.
Temperature is set, it is
increasing, but there is no
possibility to adjust it.
•
Damaged temperature
regulator.
•
Contact the sales agent.
Temperature is set, the
device is heating up, but the
control light is not lit.
•
Damaged control light.
•
Contact the sales agent.
If you cannot remove the malfunctions:
-
do not open the housing,
-
notify the customer service point or contact the sales agent,
while providing the following information:
type of malfunction;
article and serial number (rating plate at the rear of the device).