Cleaning
26 / 32
610842
EN
Key
Function
Message
User option
(Default factory settings in bold)
9
Manual Lock
function for
thermal
processing
time
Code 8-1
Factory default programmed thermal
processing programs may be combined
with manual time input
Code 8-1
Factory default programmed thermal
processing programs may be used without
manual time input only
0
'Filter
Cleaning'
message
Code 0-0
The appliance displays the 'Filter Cleaning'
message every 90 days
Code 0-1
The appliance displays the 'Filter Cleaning'
message every 60 days
Code 0-2
The appliance displays the 'Filter Cleaning'
message every 30 days
Code 0-3
The appliance displays the 'Filter Cleaning'
message every 10 days
Code 0-4
The 'Filter Cleaning' message is not displayed
Tab. 4
NOTE! The 'Filter Cleaning' message reminder
The 'Filter Cleaning' message reminder is displayed for 245 hours. With
appliance door closed, the message reminder may be cleared by pressing
STOP key and holding it until an acoustic signal is heard.
6
Cleaning
6.1
Safety Instructions for Cleaning
• Before cleaning, disconnect the appliance from the power supply.
• Leave the appliance to cool down completely.
• Make sure water does not enter the appliance. Do not immerse the appliance in
water or other liquids during cleaning. Do not clean the appliance with a
pressurized water jet.
• Do not use any sharp or pointed, nor metal implements (knife, fork, etc.). Sharp
or pointed implements may damage the appliance, and when in contact with live
parts, they may cause electric shock.
• For cleaning, do not use any scouring agents that contain solvents nor corrosive
cleaning agents. They may damage the surface.
Summary of Contents for 18270D
Page 1: ...18270D 610842 ...
