Installation and operation
14 / 32
610842
EN
• The device must remain a minimum distance of 2 m from radios, televisions,
and other such electronics in order to avoid interference with the signal
reception.
Adaptation for Stacking 2 Appliances
The units of the appliance may be stacked. The maximum stack height is two units
of the appliance.
The installation of stacked units is as follows:
1. Stack one microwave unit on another one and remove from each of them
connection plates (a, Fig. 3), fixed at the back wall of both units, in the bottom
right corner.
2. Use four screws and the connection plate (1) to secure the top and bottom
microwave unit.
3. Makes sure that the top microwave unit is safely stacked and on a practical
height.
Fig. 3
Power supply connection
• Verify if technical data of the appliance (see rating plate) correspond with the
local electric power grid specification.
• Connect the appliance to a single, properly grounded mains socket with
protective contact. Do not connect the appliance to a multi-socket.
• The power cord should be laid in a way preventing anyone from threading on it
or tripping against it.
Summary of Contents for 18270D
Page 1: ...18270D 610842 ...
