BARTHE
www.barthe-audio.com
THE INNOVATION IN AUDIOVISUAL
21
VI - QUESTIONS
Double check the following points before concluding that your system is down.
1-
Are all connections correct?
2-
Is the system used in accordance with the instruction manual?
If the system is not working properly, perform the check list below. If any of these checks does not resolve the
problem, the system may be defective. Then immediately unplug the power cord and contact your dealer.
SYMPTOM
CAUSE
SOLUTION
The device does not turn
on when you press the
power switch.
- The power cord is not
properly plugged into the wall
outlet.
- The main plug is not
working.
- The mains voltage does not
match the device’s
specification.
- Blown fuse.
-Plug the power cord into the
wall outlet.
-Call an electrician.
- Obtain an adapter.
- Replace the fuse (see section
« cleaning »).
The ON/OFF button seems
to work randomly.
-There is a 3 seconds timing
protection of the unit when
the unit is turned off.
-After power is turned off,
wait at least 3 seconds before
switching it on again.
The device does not react
to the action of keys.
- The switch is in the Off
position.
- The device is not connected.
- Turn the switch On.
- Disconnected and
reconnected the device.
There is no sound.
- The level of the command of
the general volume is
insufficient.
- The level of the volume
control of the source is
insufficient.
- Adjust the volume control on
the right position.
- Adjust the volume control on
the right position.
The total number of CD
tracks is not displayed
when loading the disk.
- The disc is inserted upside
down.
- The disk is dirty.
Improper disc format.
- Reload the disc.
- Clean the disc.
- Use the correct disc format.
The sound is choppy.
- Dust, fingerprints, saliva, etc
on the disc.
- The disc is scratched.
- The player is not stable and
is vibrating excessively.
- Clean the disc.
- Replace the disc with a non-
scratched disc.
- Place the player on a stable
surface free from vibration.
