background image

CONCRETE SAW INSTRUCTION MANUAL

 

 

 

 BARTELL MORRISON INC.   

 BARTELL MORRISON (USA) LLC

375 ANNAGEM BLVD, MISSISSAUGA, ONTARIO, CANADA, L5T 3A7, 905-364-4200 FAX 905-364-4201

12 INDUSTRIAL DRIVE, KEYPORT, NEW JERSEY, USA, 07735, 732-566-5400 FAX 732-5444

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Created: 12/08

Revised: 12/10

Keep the Concrete Saw, Engine and surrounding areas clean at all times.

3. 

When spills of fuel or oil occur, they must be cleaned up immediately.  

4. 

Dispose of 

fluids and cleaning materials as per any local, state, or federal codes and regulations.  

Store oil rags in a covered metal container.

Never store fuel or other flammable materials near the Concrete Saw.

5. 

Do not smoke, or allow sparks, flames, or other sources of ignition around the 

6. 

Concrete Saw.

Keep grounded conductive objects, such tools, away from exposed, live electrical 

7. 

parts and connections to avoid sparking or arcing.  

These events could ignite fumes 

or vapors.

Do not refill the Fuel Tank while the Engine is running or hot.

8. 

Do not operate the Concrete Saw with known leaks in the Engine’s fuel system.

9. 

Use only Engine manufacturer’s recommended oil and fuel.

10. 

  MECHANICAL PRECAUTIONS

Prior to performing service, maintenance, or cleaning procedures, always make 

1. 

sure the Engine’s Ignition Switch is in its “OFF” position.  

Allow the Engine to 

completely cool.  Then, remove the Spark Plug Wire from the Spark Plug.

Do not alter or adjust any part of the Concrete Saw or its Engine that is assembled 

2. 

and supplied by the manufacturer or distributor.

Always follow and complete scheduled Engine maintenance.

3. 

CHEMICAL PRECAUTIONS

Avoid contact with hot fuel, oil, exhaust fumes, and solid surfaces.

1. 

Avoid body contact with fuels, oils, and lubricants used in the Engine.  

2. 

If 

swallowed, seek immediate medical treatment.  Do not induce vomiting if fuel is 

swallowed.  For skin contact, immediately wash with soap and water.  For eye contact, 

immediately flush eyes with clean water.

NOISE PRECAUTION

Prolonged exposure to high noise levels is hazardous to hearing.  

1. 

Always wear 

ANSI-approved hearing protection when operating or working around the Concrete Saw 

when it is running

MISCELLANEOUS PRECAUTION

WARNING! 

1. 

The warnings and precautions discussed in this manual cannot cover all 

possible conditions and situation that may occur.  It must be understood by the operator 

that common sense and caution are factors which cannot be built into this product, but 

must be supplied by the operator.

UNPACKING

When unpacking, check to make sure all of the parts shown on the Parts List in this 

manual are included.

Summary of Contents for FS350














Reviews: