Bartell Global BSS18H39W, Owner'S Manual

Page: 6 / 16

CONCRETE SAW OI
– B19041
OWNER’S MANUAL
5
SAFETY INFORMATION
– BSS18H39W
Safety Precautions:
Before using this equipment, study the entire owner’s manual to become familiar with its
operation. Do not allow untrained or unauthorized personnel, especially children, to operate this
equipment. Use only factory authorized parts for service.
This manual contains warnings which must be followed to reduce the possibility of personal
injury, damage to the equipment, or improper service.
Obey all safety messages that follow to avoid possible injury or death.
“Danger” indicates a
hazardous situation which, if not avoided, will result in death or serious injury.
“Warning”
indicates a hazardous situation which, if not avoided, could result in death or serious injury.
“Caution” indicates a hazardous situation which, if not avoided, could result in minor or
moderate injury.
Operating Safety
Failure to follow instructions in this manual may lead to serious injury or even death! This
equipment is to be operated by trained and qualified personnel only. This equipment is for
industrial use only. The following safety guidelines should always be used when operating this
concrete saw:
Do not operate or service this equipment before reading the entire manual. This equipment
should not be operated by persons under 18 years of age.
Never operate this equipment without proper protective clothing, shatterproof glasses, steel-
toed boots and other protective devices required by the job. Under certain conditions sparks
may fly, so wearing non-flammable clothing is suggested.
Never use accessories or attachments, which are not recommended by Bartell Morrison for this
equipment. Damage to the equipment and/or injury to user may result.The manufacturer does
not assume responsibility for any accident due to equipment modifications.
Whenever necessary, replace nameplate, operation and safety decals when they become
difficult to read.
All guards must be securely in place before starting.
Never
touch the hot exhaust manifold, muffler or cylinder. Allow these parts to cool before
servicing engine or saw.
Allow the engine to cool before adding fuel or performing service and maintenance functions.
Contact with hot components can cause serious burns.