Bartell Global BSS18H39W, Owner'S Manual

Page: 14 / 16

CONCRETE SAW OI
– B19041
OWNER’S MANUAL
13
Optional Items
– BSS18H39W
Water Tank Kit
Use only for dry cutting. The water tank is designed only to suppress airborne concrete dust.
Cutting Depths
Blade Size Maximum Depth
10 Inches (250 mm) 2
– 5/8 (65 mm)
12 Inches (300 mm) 3
– 5/8 (90 mm)
14 Inches (350 mm) 4
– 5/8 (115 mm)
16 Inches (400 mm) 5
– 5/8 (140 mm)
18 Inches (450 mm) 6
– 5/8 (165mm)
Governor Speeds
It is critical that the governor and throttle on all internal combustion engines are adjusted
properly. Engine speed is preset at factory for proper sawing speed. It is not normally
necessary to change this setting. It should be periodically verified after saw is placed into
service. To change governor sets, refer to the engine manual.
Warning: Over speeding the engine and blade shaft can cause serious damage to the blade
resulting in personal injury to the operator and bystanders. To assure the proper governor
adjustments, do not exceed the following speeds:
Maximum No Load Blade Shaft RPM (3250) Maximum No Load Engine RPM (3900)
Do not use conventional (wet) diamond blades with the water tank as the water
source because there is not sufficient water flow available to properly cool the
blades
Maximum blade capacity for BSS18H39W is 18" (450mm).