Bartec TC26ex-NI, Quick Start Manual

Page: 59 / 64

TC26
ex
-NI - Touch Computer
Type B7-A2C*-****/********
Operation
Subject to technical changes.
June 2022
53/56
8.3 Scanning – RFID NFC/HF
NFC/HF RFID is a short-range wireless connectivity technology standard that enables a
secure transaction between a reader and a contactless smartcard.
The technology is based on ISO/IEC 14443 type A and B (proximity) ISO/IEC 15693
(vicinity) standards, using the HF 13.56 MHz unlicensed band.
The device supports the following operating modes:

Reader mode

Card Emulation mode
With NFC, the device can:

Read contactless cards such as contactless tickets, ID cards and ePassport.

Read and write information to contactless cards such as SmartPosters and tickets, as
well as devices with NFC interface such as vending machines.

Exchange data with another NFC device.

Emulate contactless cards such as payment, or ticket, or SmartPoster.
The device NFC antenna is positioned to read NFC cards from the top of the device while
the device is being held.
8.3.1 Scanning
1. Start an NFC-enabled application.
2. Move the device near the NFC card until the card is detected.
3. Hold the card in position until the read process is complete. This is usually
indicated/acknowledged by the application.
For detailed information on the RFID NFC/HF reader used, refer to the "“Product
Reference Guide TC26 (EN)“ from ZEBRA.