Bartec TC26ex-NI, Quick Start Manual

Page: 35 / 64

TC26
ex
-NI - Touch Computer
Type B7-A2C*-****/********
Transport and storage
Subject to technical changes.
June 2022
29/56
6 Transport and storage
6.1 Transport
Report any transport damage or incomplete deliveries immediately after receipt in writing
to the forwarding company and BARTEC GmbH.
Any damage caused through incorrect storage shall not be covered by the warranty
provisions of BARTEC GmbH.
Battery is UN38.3 conform.
Due to the transport guidelines for air freight, all batteries are delivered ex works charged
to max. 30 %.
Further information, like MSDS, can be found at
http://automation.bartec.de/indexE.htm
6.2 Storage
ATTENTION
Property damage through incorrect storage!

Observe storage temperatures.

Keep humidity away from the Touch Computer.
Additional information on the batteries
The batteries of BARTEC (Type B7-A2Z0-0075 and B7-A2Z0-0080) are developed and
manufactured in accordance with the highest industrial standards. The operating time or
storage period of a battery is restricted, however. The actual life of a battery is influenced
by different factors, e.g. hot, cold, rough operating environment and falling from a great
height. If a battery is kept longer than six months, the performance may be impaired on a
permanent basis. Keep the batteries in a dry, cool place. For longer periods of storage,
remove the batteries from the device to prevent self-discharge, rusting of the metallic and
the escape of electrolyte.
Batteries kept for a duration of six months or longer should be charged and discharged
again at least every three months. If electrolyte has escaped, do not touch the areas
affected and dispose of the batteries as prescribed. Replace the battery if the operating
time has shortened considerably.
The standard warranty period for all BARTEC batteries is six months, whereby it is irrelevant
whether the battery was acquired separately or was contained in the scope of the delivery
of the Touch Computer.