TC26
ex
-NI
- Touch Computer
Type B7-A2C*-****/********
Basic safety information
Subject to technical changes.
June 2022
11/56
2.4
RF Exposure Guidelines
SAFETY INFORMATION
Reducing RF Exposure – Use Properly
Only operate the device in accordance with the instructions supplied.
The device complies with internationally recognized standards covering human
exposure to electromagnetic fields.
2.4.1
US and Canada - Co-located statement
To comply with FCC RF exposure compliance requirement, the antenna used for this
transmitter must not be co-located or operating in conjunction with any other
transmitter/antenna except those already approved in this filing.
Use only BARTEC tested and approved accessories to ensure FCC Compliance. The use
of third-party accessories may not comply with FCC RF exposure compliance requirements
and should be avoided. The FCC has granted an Equipment Authorization for these devices
with all reported SAR levels evaluated as in compliance with the FCC RF emission
guidelines. SAR information on these terminals is on file with the FCC and can be found
under the Display Grant section of www.fcc.gov/oet/ea/fccid.
This device was tested for typical body worn operation.
2.4.2
LED Devices
Classified as ‘EXEMPT RISK GROUP’ according to IEC 62471:2006 and EN 62471:2008.
Pulse duration
SE4710: CW
2.4.3
Power Supply
WARNING ELECTRICAL SHOCK
Use ONLY a BARTEC approved Nationally Recognized Test Laboratory (NRTL)
Certified ITE (LPS/SELV) power supply with electrical ratings: Output 5 VDC, min 2.5 A,
with a maximum ambient temperature of at least 50° C.
Use of alternative power supply will invalidate any approvals given to this unit and may
be dangerous.
Summary of Contents for TC26ex-NI
