TC26
ex
-NI
- Touch Computer
Type B7-A2C*-****/********
Operation
Subject to technical changes.
June 2022
41/56
8.1.4
Charging the Main battery
Before using the device for the first time, charge the main battery until the green
Charging/Notification light emitting diode (LED) remains lit. To charge the device, use a
cable or a cradle with the appropriate power supply.
In many cases, charging the battery to 90% provides plenty of charge for daily use.
8.1.4.1
In Base station (USB/Ethernet)
Provides 5 VDC power for operating the device.
Charges the TC26
ex
-NI with inserted battery.
Provides USB communication with host computer.
DANGER
Non certified accessories endanger explosion protection.
Danger to life exists in hazardous areas!
Only use the Base station from BARTEC with type G7-A0Z0-0052.
1.
Charge the battery only outside hazardous areas.
2.
Connect the base station to a power source.
3.
Place the bottom of the device into the base station.
4.
Rotate the top of the device until the connector on the back of the device mates with
the connector on the cradle.
5.
Ensure the device is connected properly. The Charging/Notification LED on the device
begins blinking amber indicating that the device is charging.
1
DC-power port
2
RJ-45 connector (Ethernet)
3
USB micro-B port
4
USB micro-B connector
5
USB A connector
6
Ethernet cable
7
Power supply with DC connecting cable
8
USB cable
9
Wall charger
Summary of Contents for TC26ex-NI
