Bartec APEX (APC) 07-3704 Series, Operating Instructions Manual

Page: 26 / 44

APEX / SILAS
Pressurized Cabinet
Installation
Rev. - 01-3704_7D0001_Manual_APC-SPC_20200617_jrs_en.docx Page 23 of 40
Erection
Proceed as follows when installing the APEX (SILAS) pressurized cabinet:
Procedure
-
Align the APEX (SILAS) pressurized cabinet horizontally and vertically and
attach it with the fastening material provided for that purpose.
-
During the installation, comply with the diagrams and technical documents
and the respective operating instructions for the fitted components and all
associated operating equipment.
-
Make sure that the APEX (SILAS) pressurized cabinet is installed in
compliance with the details in the technical documentation and the
specifications on the type plate.
Make sure that the following requirements are satisfied when installing:

Effective ventilation and exhaust and also adequate air circulation must be
ensured in front of the purging outlet.

To prevent the accumulation of stale air, suitable spacing must be ensured
in front of the purging gas outlets and openings.

In particular, in front of the outlets, care must be taken to keep the ambient
air free of any dirt which might enter the outlets.

It is not permissible to allow any moisture near the external outlet openings
as it is important not to let moisture enter the openings (protection from
the weather).