Bartec APEX (APC) 07-3704 Series, Operating Instructions Manual

Page: 11 / 44

Safety
APEX / SILAS
Pressurized Cabinet
Page 8 of 40 01-3704_7D0001_Manual_APC-SPC_20200617_jrs_en.docx Rev.-
Safety instructions for operation
Commissioning

Before commissioning, check that all components and documents are
available.
Inspection

Under EN/IEC 60079-17, the owner of electrical systems in hazardous
areas is obliged to have them checked by a qualified electrician to ensure
that they are in a proper condition.
Maintenance

For electrical systems, the relevant installation and operating regulations
must be observed (e.g. Directive 99/92/EC, Directive 2014/34/EC, BetrSichV
or the nationally applicable ordinances EN/IEC 60079-14 and the DIN VDE
0100 series)!

Please observe the national waste disposal regulations for disposal.
Servicing

Regular servicing is not necessary if the device is operated correctly in
accordance with the installation instructions and ambient conditions.

BARTEC recommends annual servicing and inspection.

See Chapter “Maintenance and care”.
Repairs

Repairs on explosion-protected equipment may be done only by authorised
persons working in accordance with the latest developments in technology
and using original spare parts. The applicable provisions must be observed.

Repairs must be carried out in accordance with EN / IEC 60079-19