LABDMM
2
USER GUIDE
MO.LABDMM2.560.ENG.R1
Pag. 12
17. KEYS DESCRIPTION
Switch the manometer ON.
Keep pressed for 3 seconds gives access to the Parameter Menu
Keep pressed for 5 seconds switch the manometer OFF.
If enabled, each time the key is pressed (for a short time), the display back Light is activated
for the time that has been set in the Parameter Menu.
During the measurement, if pressed for 3 seconds, it performs the ZERO of the display,
the ZERO has no effect on the graphical pressure bar indication.
During the measurement, pressed for 5 seconds, disables the ZERO function showing the
pressure gauge offset.
In Peak Mode, reset the measured peak value.
In the parameter menu, decrease (
) the value on the display
During the measurement, pressed for
2 seconds
, activates the
Peak +
function (indicates
the highest pressure detected after its activation).
During the measurement, pressed for
4 seconds
, activates the
Peak -
function (indicates
the lowest pressure detected after its activation)..
During the measurement, pressed for
6 seconds
, displays the
TEMPERATURE
, to return to
pressure press the button again.
Within the parameter menu, increase (
) the value on the display.
18. PEAK FUNCTION
The
PEAK
function is used to maintain the displayed
value of positive or negative pressure peaks on the
display.
Pressing the
PEAK
button enables the function.
The function is deactivated by pressing the
PEAK
button again, entering the main menu or when the
manometer is turned off.
The
PEAK
values can be reset manually using the
ZERO
key.
Summary of Contents for LABDMM2
