BART LABDMM2, User Manual

Page: 32 / 57

LABDMM 2 USER GUIDE
MO.LABDMM2.560.ENG.R1
Pag. 4
6. INTRODUCTION AND FIELD OF APPLICATION
LABDMM2 is a professional digital pressure gauge made according to the most modern technologies to
guarantee a high level of reliability, versatility and practicality at the same time.
The sturdiness and a high stability over time are guaranteed by a monolithic sensor made entirely of stainless
steel capable of working even in the presence of highly dynamic pressures, and by a robust housing made of
painted aluminum.
Designed to be used in metrological laboratories, calibration systems, automation in general and process
controls where it is necessary to monitor, record and transmit data.
During the production cycle the pressure gauge is calibrated and
ACCREDIA certified for the PRESSURE
measurement to guarantee a measurement uncertainty better than 0.05% in 28 different pressure ranges,
RELATIVE , ABSOLUTE and in VACUUM .
With this instrument it is possible to simultaneously measure the PRESSURE generated by air, gas, oil, water or
any other type of non-corrosive fluid and the TEMPERATURE of the fluid that generates the pressure.
The pressure gauge is powered by an internal rechargeable Li-ion battery with up to 50 hours of continuous
operation (without backlight). To recharge the battery you can use the USB port with a 5Vdc power supply or
by connecting it directly to the PC.
For continuous operation it is possible to keep the manometer powered by the USB port or for industrial
applications, it is possible to provide an external supply from 12 to 24 Vdc (option).
In the programming menu accessible from the keyboard it is possible to customize the behavior of the pressure
gauge by adjusting various functions such as the
DIGITAL FILTER , which allows to keep the measurement stable
even in the presence of unsteady pressures, resolution, unit of measurement, Auto power off etc ...
Using the keyboard it is possible to set the positive and negative
PEAK function to record the maximum and
minimum pressures detected during the test.
On the display there is an analogue indication with pressure bar always active even within the programming
menu.
The
WIRELESS transmission is planned as an option to create a network of pressure gauges (up to 32) managed
by a PC using the WinWimod software for mobile or reconfigurable applications without the need for collecting
cables.
Main features :
• Normalized pressures from 100 mbar to 3000 bar ABSOLUTE, RELATIVE and VACUUM.
• TEMPERATURE measurement in ° C or ° F.
• 5-digit LCD display with backlight.
• Resolution, digital filter, conversions in units of measurement.
• Functions of ZERO, PEAK max. and min.
• KEY LOCK function to protect the use parameters from unauthorized changes.
• LOOP function in which the measurement of pressure and temperature are alternated on the display.
OPTIONS :
• RS232 communication port (as an alternative to USB communication).
• Internal DATA LOGGER with clock and calendar.
• Wireless transmission of pressure and temperature measurement.
• External power supply from 12Vdc to 24Vdc
• Built-in container.