Baroness LM315GC, Service Manual

Page: 75 / 199

Specifications
Adjusted Value
Parking brake switch Slight clearance
A clearance between the switch contact point
and the parking brake lever when the parking
brake lever is at the 4th notch
Proximity sensor
(Reel rotation start position
detection)
0 mm (0 in)
Horizontal distance between the sensor tip and
the joint end of the tip of the right front up/
down cylinder when the mower unit is lowered
1.0
–
2.5 mm (0.04
–
0.10 in)
Clearance between the sensor detection part
and the joint of the tip of the right front up/
down cylinder when the mower unit is lowered
Proximity sensor
(Mower unit up position
detection)
415.0 mm (16.34 in)
Distance between the tip of the rear mower
arm and the floor when the mower unit is
raised
1.0
–
2.5 mm (0.04
–
0.10 in)
Clearance between the sensor detection part
and the cam when the mower unit is raised
192.0 mm (7.56 in)
Length of the mower up/down cam adjustment
rod
Proximity sensor
(Mower unit down position
detection)
285.0 mm (11.22 in)
Distance between the tip of the rear mower
arm and the floor when the mower unit is
lowered
1.0
–
2.5 mm (0.04
–
0.10 in)
Clearance between the sensor detection part
and the cam when the mower unit is lowered
192.0 mm (7.56 in)
Length of the mower up/down cam adjustment
rod
Proximity switch 5.0 mm (0.20 in)
Clearance between the switch and the plastic
magnet when the traveling pedal is neutral
Electromagnetic clutch 0.3
–
0.6 mm (0.01
–
0.02 in)
Clearance between the clutch rotor main body
and the armature board when the
electromagnetic clutch is not energized
Limit switch (mower pedal
switch)
75.0 mm (2.95 in)
Distance between the pedal back joint and the
step when the mower pedal is released
Adjustment of Safety Switch
See " "Adjustment" (Page 4-40) " for method
for adjustment.
Electr
ic
al system
LM315GC
Electrical system
Page 5-3 Specifications