Baroness LM315GC, Service Manual

Page: 172 / 199

Attach the stop ring.
2
1
5
6
3
4
3
t7ajai-024
Groomer Assy_017
1 Stop ring
2 Wave washer
3 Bearing
4 Collar
5 Oil seal
6 Grease nipple
For installing the groomer shaft Assy onto
the vertical gear case, reverse the removing
procedure.
Note:
The nut fixing the vertical gear is the left
screw.
Important
Confirm that the clutch lever shaft fits into the
grooves of the gear of the clutch shaft Assy.
Install the clutch shaft Assy.
Install the gear case cover.
Install the clutch lever and clutch holding
spring onto the gear case cover.
Assemble the vertical housing and install it
onto the groomer shaft Assy.
Install the groomer Assy onto the mower
unit. (See " "Installation of Groomer Assy"
(Page 7-10) ".)
[3]
19.
20.
21.
22.
23.
24.
Confirm that two groomer blades fit into each
groove of the front roller.
t7ajai-031
2
3
1 2
4
Groomer Assy_018
1 Groomer blade
2 Spacer
3 Special nut
4 Front Roller
Note:
If the whole groomer blades are inclined to
the right or left, adjust them with the left
and right special nuts.
If the clearance between the roller crests
and groomer blades is narrow or they
touch each other, adjust them with the
spacer (adjustment washer).
25.
･
･
LM315GC
Operating Machine and Mower Units
Page 7-54 Inspection and repair of each section