Baroness LM315GC, Service Manual, Page: 128 / 199

Remove the high nut, spring washer A,
spring washer and carriage bolt on the
opposite side.
Remove the bolt and spring washer B and
then remove the housing plate.
ywised-008
1,2,3
4,5
6
Removal of Groomer Assy_002
1 High nut
2 Spring washer A
3 Carriage bolt
4 Bolt
5 Spring washer B
6 Housing plate
Hold the gear case in one hand and then
slowly lift up the groomer in the direction of
the arrow with the other hand.
ywised-009
Removal of Groomer Assy_003
4.
5.
Hold and move the groomer in the direction
of the arrow to remove the groomer.
ywised-010
Removal of Groomer Assy_004
Installation of Groomer Assy
Caution
The reel cutter (cutting cylinder), bed knife
(bottom blade), and groomer blades are all
edged tools.
Handle them carefully, since they could cut
your hands and feet.
Important
Be sure to replace the O ring with a new one,
if it is damaged.
kjb2m8-001
1
Installation of Groomer Assy_001
1 O-ring
For installation, reverse the removing
procedure.
6.
LM315GC
Operating Machine and Mower Units
Page 7-10 Removal and installation of each section