Baroness LM315GC, Service Manual

Page: 100 / 199

Glow (thermo-start)
When the ignition key is kept in the "GLOW"
position, the glow plug is generating heat and
the thermo-start lamp is turned on.
The lamp turns off at the specified time.
However, the lamp turning off is not related to
the glow plug generating heat, and the plug is
kept heated as long as the key is in "GLOW"
position even after the lamp is turned off.
The glow lamp will stay illuminated for five
seconds.
The glow plug is located at engine head of
each cylinder and is connected by the plate.
The electrical circuit is grounded at the engine
block.
6raejy-002
STOP
START
GLOW
ON
OFF
Glow (thermo-start)_001
￭
START
The engine starts by rotating the starter
motor, when the magnet switch of the starter
motor is energized with the key at "START"
position.
The starter motor is connected via four safety
switches.
Only if the engine activation conditions of the
interlock system are satisfied, the starter
motor can be activated. (See " "Interlock
System Operation Requirements" (Page 5-11)
")
pff35r-002
STOP
START
GLOW
ON
OFF
START_001
Pilot lamps
Status of charge of the engine, glow, and oil
pressure is displayed with illumination of the
lamps.
tjy2ah-002
4
6
8
5
7
9
1 2 3
Pilot Lamps_001
￭
LM315GC
Electrical system
Page 5-28 Electrical components