Baroness LM2400, Owner'S Operating Manual

Page: 48 / 75

Mower Unit Up/Down Lever
Caution
Before raising or lowering the mower units,
make sure that there are no people around
the machine.
Caution
Be careful since shifting the mower unit up/
down lever to the "DOWN" position lowers
the mowers, even while the engine is
stopped.
Caution
Before operating the mower unit up/down
lever, be sure to set the stop valve to the
"Open" position.
Caution
When the mower lock levers (latches) are
engaged, do not operate the mower unit up/
down lever.
The mower unit up/down lever is located in the
operation panel and raises or lowers the mower
units.
Shift the lever to the "DOWN" position to lower
the mowers, and shift it to the "UP" position to
raise the mowers.
1
B
C
A
zhz6po-004
Mower Unit Up/Down Lever_001
1 Mower unit up/down lever
A Neutral
B Up
C Down
Note:
Even if the reel rotation switch is set to the
"Rotate" position, the reel cutter (cutting
cylinder) stops rotating when the mower unit up/
down lever is moved to the neutral position or
the mower units are raised.
Stop Valve
Caution
When you move the machine, or if you stop
the engine with the mower units raised, be
sure to set the stop valve to the "Stop"
position.
The stop valve is located underneath the right
side of the driver's seat.
This valve prevents all raised mower units from
falling.
A
B
1
ofo39l-004
Stop Valve_001
1 Stop valve
A Stop
B Open
LM2400
Handling Instructions
Page 4-26 Operation of Each Section