Baroness LM2400, Owner'S Operating Manual

Page: 32 / 75

Belt
Inspection of Belt
Caution
The engine must be stopped when the belt is
inspected.
Caution
If you have removed the cover during
inspection, make sure that you replace it in
the original position securely.
If the cover remains removed, the operator
may come in contact with the rotating objects
or belt, possibly resulting in injuries.
Important
A slacking or damaged belt or damaged fan
may cause overheating or lack of a battery
charge.
Press the middle of the belt with your finger
to check the belt tension.
Make sure that there are no cracks,
damage or abnormal wear.
Around the Engine
Inspection of Engine-Associated Parts
For details on handling the engine, please refer
to the separate Engine Operating Manual.
Check the fuel system parts for loosened or
cracked joints and leakage. Replace the
parts if necessary.
Blow compressed air to clean any grass or
flammable materials that may be attached
inside or around the muffler.
Engine Oil
Inspection of Engine Oil
Stop the engine, wait for 10 to 20 minutes
for the engine to cool down, then check the
oil level.
1.
2.
1.
2.
1.
Position the machine so that the engine will
be level, then insert the oil gauge all the
way to check the oil level.
1
2oowuz-003
Inspection of Engine Oil_001
1 Oil gauge
The appropriate oil level should be between
the upper and lower limit lines on the
gauge.
2 3
1
rnr453-004
Inspection of Engine Oil_002
1 Oil gauge
2 Upper limit
3 Lower limit
Supply of Engine Oil
For details on handling the engine, please refer
to the separate Engine Operating Manual.
Important
Do not fill too much engine oil. Otherwise, the
engine may be damaged.
Important
Do not mix different types of engine oil.
2.
3.
LM2400
Handling Instructions
Page 4-10 Inspection Before Use