Travel of Machine
Traveling the Machine
Warning
Do not start to move or stop the machine
abruptly.
Install traveling tires.
Flip up the stand.
Set the traveling/working selector lever to
"Travel ON" position of.
Start the engine.
Release the brake.
Release the safety lock and grip the main
clutch lever slowly.
The machine can start traveling.
Cutting Work
Cutting Work
Warning
Do not start to move or stop the machine
abruptly.
Caution
Do not operate on a steep slope.
Caution
Be sure to operate at an appropriate speed for
the mowing site.
For mowing on an undulated surface, mow
with constant engine rotation and lowered
cutting speed.
Caution
Be sure to attach the grass catcher.
Discharge the clippings at the right time during
operation.
Remove the traveling tires.
Flip up the stand.
Install the grass catcher.
Move the FOC (High/Low Clip) selector lever
to the desired position.
Move the air adjusting plate to the desired
position.
1.
2.
3.
4.
5.
6.
7.
1.
2.
3.
4.
5.
Move the groomer clutch lever to the desired
position.
Move the traveling/working selector lever to
the "Reel ON" position.
Start the engine.
Release the brake.
Release the safety lock and grip the main
clutch lever slowly to start mowing.
Note:
The factory default maximum engine rotation
speed is set to 3,400 rpm.
Operate at about 3,000 rpm.
Removing/Installing Traveling Tires
Caution
Stop the engine before removing / installing
traveling tires.
Important
Remove the travelling tires before cutting
work.
Traveling tires is used to travel.
Removing Traveling Tires:
Flip down the stand.
1
2
x9pzjh-001
Removing/Installing Traveling Tires_001
1
Stand
2
Traveling tire
6.
7.
8.
9.
10.
1.
Handling Instructions
LM18GB
・
LM56GB/LM66TB
Handling Instructions
Page 5-33
Travel of Machine
