Maintenance (Main Body)
Adjustment of Brake
Danger
Danger
If the brake wire is cut, the machine will be
unable to stop. This would be extremely
dangerous.
If the brake wire is cracked or damaged,
replace it with a new one immediately.
Danger
Danger
If the brake is not sufficiently effective when it
has been applied, adjust the brake wire.
Adjust the brake by use of the brake wire
adjusting nut.
1
nfzln9-008
Adjustment of Brake_001
1
Adjusting nut
Make sure that the brake shoe does not
touch the brake drum.
Avoid the brake always being engaged.
Note:
The brake shoe may touch the brake drum if
you hear a rubbing sound or the drum feels
heavy when rotating the drum.
1.
2.
Adjustment of Engine Clutch
When reinstalling the engine:
Adjust the clearance between the engine
clutch and clutch facing so that it will be
approx. 0.5 - 1.0 mm (0.020 - 0.039 in) when
gripping the main clutch lever.
1
2
A
wdzf6u-001
Adjustment of Engine Clutch_001
1
Engine clutch
2
Clutch facing
A
0.5 to 1.0 mm (0.020 to 0.039 in)
Loosen the 4 bolts securing the engine.
Insert a thickness gauge (accessory tool)
from the front and rear of the clearance,
make adjustment so that the front and rear
clearances will be the same distance, and
then retighten the bolts A.
1
3
2
wdzf6u-002
Adjustment of Engine Clutch_002
1
Engine
2
Bolt A
3
Bolt B
1.
2.
LM18GB
・
LM56GB/LM66TB
Maintenance
Page 6-18
Maintenance (Main Body)
