Tighten the nut A.
7
1
5
4
2,3
6
gp7sf7-002
Adjustment of IGCA (Independent Grass Catcher Arm)_002
1
Link rod
2
Snap pin
3
Washer
4
Flat head pin
5
L-shape bracket
6
Nut A
7
Nut B
Repeat the same process for adjustment of
the opposite link rod.
Adjustment of gap for the grass catcher:
Important
Adjust so that the grass catcher will not
overlap with the stay.
Important
Adjust so that the small gap between the
grass catcher and the stay will be even.
1
2
gp7sf7-003
Adjustment of IGCA (Independent Grass Catcher Arm)_003
1
Grass catcher
2
Stay
Loosen the right and left locknuts.
5.
6.
1.
Remove the right and left clip pin.
Important
The shaft has a through-hole into which the
clip pin will be inserted.
To adjust length always turn the shaft 180
degrees to keep holes aligned.
Turn the right and left shafts to adjust the
gap between the grass catcher and the stay.
Tighten the right and left locknuts.
2
3
1
gp7sf7-004
Adjustment of IGCA (Independent Grass Catcher Arm)_004
1
Locknut
2
Clip pin
3
Shaft
2.
3.
4.
Handling Instructions
LM18GB
・
LM56GB/LM66TB
Handling Instructions
Page 5-13
Adjustment Before Operating
