12
12
13
19) Detach the O-ring P18 [1-33] and the pin lock cover
[1-44] from the reel shaft on the left frame, and using
a pin remover remove the needle roller [1-45] and left
bearing collar [1-43].
* Make sure that the 20-tooth reel gear has been re-
moved.
20) Remove the tapered roller bearing [1-36] on both
sides.
21) Unscrew the three 8 hexagon socket head flush bolt
20 [1-37] from the right frame using an Allen wrench (5
mm).
22) While supporting the reel cutter, push the right reel
housing [1-58] inward. Then remove the reel cutter
downward and pull it out from the left frame.
23) Remove the right reel housing [1-58].
Pin lock cover
O-ring P18
Left bearing collar
Needle roller
Tapered roller
Bearing
Tapered roller
Bearing
8 hexagon socket head flush bolt 20
Reel housing
