36
36
37
[11] Disassembling / assembling / adjusting the brake
Wire mounting bracket
Brake Ass'y
Brake shoe
Brake shoe
Sandpaper
Bring down
A
A
A
B
B
B
Wire mounting bracket
Brake Ass'y
1) Remove the two bolts [7-53] from the wire mounting
bracket.
Remove the three bolts [7-53] from the brake Ass’y.
2) Remove the brake shoe using a flathead screwdriver.
3) With a rougher-grained sandpaper, polish the side of
the brake shoe that is touching the drum.
With a brake cleaner, remove grease from the polished
surface and the drum surface.
* When necessary, replace the brake shoe and packing
with new ones.
4) First, set the brake shoe as shown in the right illustra-
tion of step #2.
Make sure that the lever position is correct.
Install the A side of the brake shoe to A and the B side to B.
When installing the brake shoe, hook one side to A
and B and snap in the other with a pop.
* Verify if the shoe is firmly fitted or not.
5) Temporarily tighten the three bolts [7-53].
Press the lever with a finger a few times to make the
brake shoe come to the center of the brake drum, and
then firmly tighten the three bolts [7-53].
Install the wire mounting bracket [7-52].
