Barnstead International Thermolyne 859 Series, Service Manual

Page: 86 / 118

86
6. Proceed to slide the control section out of the
back of the unit. See photo below. As soon as
the control section is approximately half way
out, the thermocouple wires (Red and Yellow)
will come into view and prevent the control sec-
tion from sliding any further. The thermocouple
connectors are green, the connectors also have
a "C" for chamber, and "F" for filter printed on
them, disconnect each one.
E
QUIPMENT
T
EST
P
ROCEDURE
Control panel slid out 1/2 way
2 wire harnesses to disconnect to slide control panel out of unit.