Barnstead International Thermolyne 859 Series, Service Manual

Page: 22 / 118

11. Press the ON button. “Yes” will be displayed.
Pressing the ON button again will reset the
Setup menu to the OHAUS defaults. You will
know when this has been done when you hear a
short train of beeps.
12. Repeatedly press the MODE button until the
“Time” menu option is displayed.
13. Press the ON button to select. “Type” will be dis-
played.
14. Press the ON button. “US” will be displayed.
15. Press the MODE button. “EURO” will be dis-
played.
16. Press the ON button to select “EURO” (Military
time).
17. Repeatedly press the MODE button until the
word “Set” is displayed.
18. Pressing the ON button will display the time that
is entered into the balance. If the time is incor-
rect, it may be changed by pressing the MODE
button to cycle through the hours. Once the
correct hour is displayed, press the ON button to
accept the new hour setting and move to the
minutes setting. Press the MODE button to
cycle through the minutes. Once the correct
minutes are displayed, press the ON button to
accept the new minute setting at which time the
display will change to read “Set”.
19. Press the MODE button. “End” is displayed.
20. Press the ON button. “Time” is displayed.
21. Press the MODE button. “Date” will be dis-
played.
22. Press the ON button to select. “Type” will be dis-
played.
23. Press the MODE button. “Set” will be displayed.
This menu will allow the date to be changed if
22
OHAUS B
ALANCE