Barnstead International MaxQ 4000, Manual

Page: 12 / 36

1. Speed Display: 3 digit LED indicates actual or set point speed
2. Up Arrow Key: Increases platform rotation speed
3. Down Arrow Switch: Decreases platform rotation speed
4. Speed Light: Red light Illuminates when a locked rotor or over-speed condition exists
5. RPM Light: Illuminates to indicate actual speed
6. Set rpm Light: Illuminates when speed is being set
7. Stop Switch: Stops platform rotation
8. Start Switch: Starts platform rotation
9. Power Switch: Turns power on and off to shaker
10. Up Arrow Key: Increases shaking time
11. Down Arrow Key: Decreases shaking time
12. Time(r) Display: 3 digit LED indicates time remaining or elapsed time
13. Set time: Illuminates when time is being set
14. Timer/Elapsed: Allows the user to choose elapsed time operation, elapsed, or timed operation, timer.
15. Hours/Minutes Membrane Switch: Allows user to choose timing operation in either hours or minutes
16. Minutes: Timer indicates minutes
17. Hours: Timer indicates hours
18. Elapsed Timer Light: Indicates accumulated time
19. Temperature Display: 3 digit LED indicates chamber temperature
20. Up Arrow Key: Increases temperature
21. Down Arrow Key: Decreases temperature
22. High-Limit Light: Indicates high-limit control has been activated
23. Water Light: This display has no function on this unit
24. Heat on Light: Indicates heaters are energized
25. Set temp Light: Indicates temperature can be set
26. Heat on Switch: Turns on heat
27. Heat off Switch: Turns off heat
12
G
ENERAL
S
PECIFICATIONS
1
2
3
4
5
7
6
8
9
E-Class Control Panel Features - Figure 2
10 11
12
18
17
16
13
15
14
19 20
21
22
23
24
25
26
27