10
G
ENERAL
S
PECIFICATIONS
Environmental Operating Conditions
Pollution Degree**
2
Installation Category**
II
Altitude
2000 meters MSL (Mean Sea Level)
Relative Humidity
20% to 80% maximum, non-condensing
Electrical Supply
120 VAC or 240 VAC
Voltage Tolerance
+10% of normal rated line
Temperature
15°C to 32°C
Product Usage
This product is intended for use indoors
only
**Refer to IEC 664-1
Caution
It is not recommended to operate shaker in a CO
2
enriched atmosphere. The formation of carbonic acid
could cause electrical failures.
Declaration of Conformity
(for CE models only)
Barnstead International hereby declares under its sole responsibility that this product conforms with the tech-
nical requirements of the following standards:
EMC:
EN 61000-3-2
Limits for harmonic current emissions
EN 61000-3-3
Limits for voltage fluctuations and flicker
EN 61326-1
Electrical equipment for measurement, control, and
laboratory use; Part I: General Requirements
Safety:
EN 61010-1
Safety requirements for electrical equipment for
measurement, control, and laboratory use;
Part I: General Requirements
EN 61010-2-051
Part II: Particular requirements for laboratory equipment for
mixing and stirring
per the provisions of the Electromagnetic Compatibility Directive 89/336/EEC, as amended by 92/31/EEC and
93/68/EEC, and per the provisions of the Low Voltage Directive 73/23/EEC, as amended by 93/68/EEC.
The authorized representative located within the European Community is:
Electrothermal Engineering Ltd.
419 Sutton Road
Southend On Sea
Essex SS2 5PH
United Kingdom
Copies of the Declaration of Conformity are available upon request.
Summary of Contents for MaxQ 4000
Page 35: ...35...
