Barnstead International MaxQ 4000, Manual

Page: 14 / 36

Electrical Requirements
SHKA4000 and SHKE4000 series shakers require a 120
VAC, 60 Hz power source. They are supplied with a 3-
wire line cord and should be plugged into an outlet
designed for 3-prong plugs. If an extension cord is used,
it also should be the 3-wire grounded type. For an outlet
designed to accept 2-prong plugs (ungrounded), it is
required that a qualified electrician replaces the outlet
with a new, grounded type.
SHKA4000-1CE and SHKE4000-1CE series shakers
require a 220-240 VAC, 50/60 Hz power source. They
are supplied with a Schuko cordset.
If a plug must be installed, use only the 3-prong ground-
ed type, rated for the unit load requirements and match-
ing the power outlet. Make sure the green ground wire is
secured to the plug ground terminal.
To eliminate hazard of electrical shock, make sure floor
around shaker is dry. In the event of accidental spilling
or splashing of liquids, clean up and/or neutralize the
spilled liquids before continuing.
Leave shaker disconnected when not in use.
14
U
NPACKING AND
I
NSTALLATION
Warning
Do not operate shaker with a dam-
aged electrical cord.