4
Introduction
As leaders in the field of sterilization, our goal is to engi-
neer and manufacture safe, efficient, quality sterilization
products. We are certain you will agree that this sterilizer
meets our goal.
Regardless of how well a piece of equipment is designed,
misuse, abuse, or neglect will deny its owner the safe, effi-
cient, quality service expected. Often, misuse, abuse or
neglect occurs unintentionally because the operator is
unaware of the proper operating and maintenance proce-
dures. This manual provides you with the information
required to properly operate and routinely maintain your
sterilizer. The information included in this manual applies to
all models unless noted for specific models.
We urge you to read this manual carefully before operating
the unit, and retain it for future reference.
Operation Overview
Hydroclave MC8 and MC10
Steam Sterilizer
The MC8 and MC10 sterilizer operates on the principle of
heated water converted to steam in a sealed pressure
chamber.
What happens when the controls are turned on?
•
The chamber vent valve opens and the heater
turns on to warm up the chamber. The items to
be sterilized are placed on the trays and the
trays are placed inside the sterilizer chamber.
(Certain parameters such as positioning and
size of the load must be observed for proper op-
eration and satisfactory result.) Then, the door is
closed and latched, and the “START” button
pressed to start the cycle.
Summary of Contents for Harvey Hydroclave MC10
