4
1 Tone - send a single tone
4
Alert - send a beeping tone
4
DTMF - send a string of digits
4
Answer - monitor the call progress sign-
als and wait for the called party to speak
before announcing the alarm message.
Access Code
Password for dial-up access to program-
ming:1 to 8 digits
Acknowledge Request
The acknowledge request at the end of the
alarm annunciation can be disabled for use
with public address systems.
Number of Rings
Sets the number of rings before the B1290
will answer the line: 1 to 8 rings or never.
Squelch Polarity
Sets the radio busy monitor to either high
or low when busy.
Relay Voices
Voice messages that are returned when a
relay is operated.
Disable Relay Voices
Relay voices are not spoken.
Relay On/Off Codes
DTMF codes that turn the relay on and off.
Independent for each relay: 1 to 8 digits
Relay Timer
Makes the relay a timed type where it will
remain on for the specified time after the
On code is received. Range is 1 to 199 in
either seconds or minutes
Relay Special Function
These automatic functions can be assigned
to the relays:
4
Relay 1: New (unacked) alarm on
4
Relay 2: Any alarm on
4
Relay 3: Alarm acknowledged (timed)
4
Relay 4: Error
Pulse Dial
Forces dialing to be pulse instead of tone.
Number of Expanders
Sets the number of connected expanders.
Disable Expander ID
Stops the site ID in the expander from be-
ing spoken.
Audio Levels
Sets the gain for audio signals in the B1290
74
Appendix A - Programmable Features