YOU:
2**
Change
B1290: ‘beep’
YOU:
#0 7664422 #8 **
[DIAL]7664422 [VOICE]
B1290: Directory B, Line One is DIAL VOICE
YOU:
**
Next
B1290: Directory B, Line Two is...
YOU:
2**
Change
B1290: ‘beep’
YOU:
#0 7668901 #8 **
[DIAL]7668901 [VOICE]
B1290: Directory B, Line Two is DIAL 7668901 VOICE
YOU:
**
Next
B1290: Directory B, Line Three is...
YOU:
#**
Quit
B1290: Enter Directory
YOU:
#**
Quit
The telephone numbers have now been programmed. Now enter the Di-
rectory Control Code
B1290: Enter Program Code
YOU:
3**
DTMF Codes
B1290: Enter DTMF Code
YOU:
7**
Directory Control Code
B1290: Directory Control Code is...
YOU:
78**
Enter Control Code
B1290: Directory Control Code is 78
YOU:
**
Next
B1290: Enter Program Code
Right now the B1290 is programmed with dialing commands in Directory
A and Directory B. Any alarms that are to be switched between these two
directories should be programmed to use Directory A or the control code
will have no effect. Each alarm has its own setting for the directory it is us-
ing. Make sure that the alarms you want to have changed are set properly.
53
Programming Examples