Appendix A - Programmable Features
Alarm Messages
Unique Site ID plus individual messages for
each input. Message length is variable
Alarm Polarity
Selects NO or NC input format
Alarm Latch
Latches fleeting alarm inputs
Alarm Debounce
Selects the delay time before a change of
state on the input is valid. Range is 0.1 to
19.9 in either seconds or minutes
Alarm Directory
Selects one of four directories that contain
command actions to be taken when the
alarm is active.
Interval Timer
Two stage timer that uses ‘A’ interval ‘A’
times before switching to ‘B’ interval. Both
‘A’ and ‘B’ interval are adjustable up to
249 minutes.
Acknowledge Code
Stops the reporting sequence: 1 to 8 digits
Interrogate Code
Speaks alarms and relay state: 1 to 8 digits
Alarm On/Off Output Codes Sent when an alarm becomes active (on) or
when it returns to normal (off). Different
codes for each alarm. 1 to 8 digits
Remote Alarm Input Codes
Simulate an alarm condition when received.
Different codes for each alarm. 1 to 8 digits
Directory Control Code
Changes the alarms to use different direc-
tories; also referred to as shift change.
Two modes are available: one where all
alarms are assigned to Directory A and can
be controlled to alternately use the other
three directories and another where
Directory A alternates with Directory B and
Directory C alternates with Directory D.
Directory Commands
Each directory can have up to 20 lines of
command sequences. The commands are
executed when an alarm using the directory
is active. The commands are:
4
Dial - phone the programmed number.
4
Voice - Speak the alarm messages
4
Radio - turn on the radio transmitter
4
Wait - Insert a pause: 1 to 249 seconds.
4
2 Tone - send a two tone page
4
5 Tone - send a five tone page
73
Appendix A - Programmable Features