Program Code 1
ÞÞ
: Voices
When you enter Program Code 1, you will hear the following prompt:
B1290: Enter Voice Code
YOU:
1**
Record Site ID and alarm messages
2**
Record relay messages
3**
Erase all messages
**
Exit to Enter Program Code prompt
1
ÞÞ
: Record Alarm Voices (includes Site ID)
Record the voice messages associated with the unit (site ID) and each indi-
vidual alarm point. These are the messages which will be announced over
the radio or telephone whenever the alarm is present.
B1290: Site is Ajax Compressor Station
YOU:
2**
Record
#**
Quit
**
Enter/Next
Default: empty
If the message is OK, continue by hitting Enter. If you would like to record a
new message, enter 2
ÞÞ
to record. As soon as you hit the second asterisk
of the Enter code, the B1290 will prompt you to record a voice message.
When you stop speaking, the B1290 will immediately play back the mes-
sage that you recorded. Pauses between words may cause the recording to
terminate. Repeat as many times as you need until the voice message
sounds acceptable. Then hit Enter (
ÞÞ
) to proceed, or
#
ÞÞ
to exit back to
the Enter Voice Code prompt.
Entering Next advances to the alarm message section and the first alarm
message will be spoken
B1290: Alarm One is …
YOU:
2**
Record
#**
Quit
**
Enter/Next
If you enter messages for all eight alarms, the B1290 will automatically exit
to the Enter Voice Code prompt.
Default: empty
29
Program Codes