1**
Pulse dialing
**
Next
Default: 0 (tone dialing)
Squelch Polarity
This setting changes the polarity of the signal used to indicate a busy radio
channel.
B1290: Squelch is …
YOU:
0**
Busy when the input is low
1**
Busy when the input is high
**
Next
Default: 0 (transmit on high)
Relay Voices
This setting enables or disables the B1290’s spoken response to a relay oper-
ation. If the B1290 is used in a control situation where monitoring the relay
operation is not required, the B1290 would be programmed with the relay
voices muted. The B1290 relay voices should be enabled where verification
of a relay operation is required.
B1290: Relay is ...
YOU:
0**
Relay voices are not used
1**
Relay voices are used
**
Next
Default: 1 (voices on)
Acknowledge Request
This setting enables or disables the B1290’s voice prompt Enter Acknowledge
Code. If the alarm announcement is over a public address system, for exam-
ple, acknowledgment is not possible. The B1290 would be programmed for
automatic acknowledge (see Interval Timer B, Program Code 4) and the re-
quest for an Acknowledge Code would be disabled.
The B1290 will continue transmitting its alarms until it receives some form
of acknowledgment, automatic or otherwise, even if it does not request one.
B1290: Acknowledge Voice is …
41
Program Codes