Barnett Engineering PRO TALK CV2 Instruction Manual Download | Manualshive

Page: 24 / 61

background image

Configuration using the PC

4-3

B1272M001

BARNETT ENGINEERING LTD.

ProTalk Cv2

Groups

Each of the six groups can be set to provide different alarm reporting operations for
selected points.

Points

In the points section, any of the hardware inputs and outputs can be selected for the Cv2
to use as alarm reporting or remote control functions. There are 30 points available.

Directories

When an alarm is detected, the Cv2 will perform a specific sequence of events
determined by the entries in the directory. Six directories are available, providing
different actions for different groups.

Programming

The programming section is used to transfer the configuration database between the PC
and the Cv2. Recorded voices can also be transferred from the Cv2 and then back.

4.6 Program Functions - Basic mode

The menu and taskbar for the basic mode is shown below:

File Operations - same as shown for the Advanced mode.

Summary - same as shown for the Advanced mode.

Change Mode - same as shown for the Advanced mode.

Alarms

Alarm settings for the 8 inputs are configured here.

Controls

Control output settings are configured here.

General

Settings that concern the operation of the entire Cv2 are entered in the General section.

Programming Programming is the same as for the Advanced mode.

4.7 Configuring the Cv2 - Advanced mode

When configuring the Cv2, the sequence described in the following section is the simplest

«
...
22
23
24
25
26
...
»

Summary of Contents for PRO TALK CV2






























































Reviews:

No comments

Related manuals for PRO TALK CV2

Brand: Manta Pages: 16

Brand: Acumen Pages: 8

AutoCommand 20095

Brand: Directed Electronics Pages: 57

Brand: MasterGuard Pages: 12

Brand: Scytek electronic Pages: 36

Brand: ZAZU Pages: 8

Brand: Radal Technology Pages: 4

Brand: Python Pages: 38

Brand: Python Pages: 16

Brand: pyrexx Pages: 84

Brand: UltraFire Pages: 18

Brand: Masterbuilt Pages: 20

Brand: Fire-Lite Alarms Pages: 48

Brand: System Sensor Pages: 8

Brand: BURGprotect Pages: 36

Brand: Marathon Pages: 2

Brand: TFA Pages: 2

Brand: Family Gard Pages: 5

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands