Barnett Engineering PRO TALK CV2 Page 61 Instruction Manual Download | Manualshive

Page: 61 / 61

background image

Warranty

10-1

B1272M001

BARNETT ENGINEERING LTD.

ProTalk Cv2

10 Warranty

Barnett Engineering Ltd. warrants that all equipment supplied shall be free from
defects in material or workmanship at the time of delivery. Such warranty shall
extend from the time of delivery for a period of one year. Buyer must provide written
notice to Barnett Engineering Ltd. within this prescribed warranty period of any
defect. If the defect is not the result of improper usage, service, maintenance, or
installation and equipment has not been otherwise damaged or modified after
delivery, Barnett Engineering Ltd. shall either replace or repair the defective part or
parts of equipment or replace the equipment or refund the purchase price at Barnett
Engineering Ltd.’s option after return of such equipment by buyer to Barnett
Engineering Ltd. Shipment to Barnett Engineering Ltd.’s facility shall be borne on
account of buyer.

(1) Consequential Damages: Barnett Engineering Ltd. shall not be liable for any

incidental or consequential damages incurred as a result of any defect in any
equipment sold hereunder and Barnett Engineering Ltd.’s liability is specifically
limited to its obligation described herein to repair or replace a defective part or
parts covered by this warranty.

(2) Exclusive Warranty: The warranty set forth herein is the only warranty, oral or

written, made by Barnett Engineering Ltd. and is in lieu of and replaces all other
warranties, expressed or implied, including the warranty of merchantability and
the warranty of fitness for particular purpose.

«
...
59
60
61

Summary of Contents for PRO TALK CV2






























































Reviews:

No comments

Related manuals for PRO TALK CV2

Brand: La Crosse Technology Pages: 18

Brand: Viper Pages: 37

Pursuit PRO-9775T

Brand: Audiovox Pages: 12

Brand: Uniden Pages: 8

Brand: Pure Acoustics Pages: 10

Brand: Trox Technik Pages: 12

Smoky Mountain Great Outdoors 3625BGD

Brand: Landmann Pages: 29

Brand: La Crosse Technology Pages: 9

Brand: Clifford Pages: 12

Brand: Audiovox Pages: 28

Prestige APS-35-CL

Brand: Audiovox Pages: 19

Brand: Prestige Pages: 20

SMOKE & CO URZ0413

Brand: Cabletech Pages: 44

Brand: MiniMax Pages: 10

Brand: Prestige Pages: 8

Brand: EST Pages: 85

Brand: Fenwal Pages: 13

Brand: Naxa Pages: 10

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands