Barkey 212.10043, Instructions For Use Manual

Page: 49 / 72

Operation
If you wish to correct or delete the user ID, you must select the "ID" position with the
left-hand selection button ("▼"). After a further scan operation the user ID is then over-
written with the currently scanned barcode, and the insertion point moves to position "1:".
If the right-hand selection button (" ") is pressed at the position "ID:", then the user ID
is deleted. Here again, the insertion point then moves to position "1:".
Correcting or deleting a sample ID is done in the same way.
The barcodes for the user ID and for the 8 sample ID's are automatically deleted when a
program has properly completed. If a program is cancelled either manually or because an
error occurs, the data are initially retained. They can be deleted manually if required, as
described above. All scanned in barcodes will in any case be deleted when the device is
switched off.