Annuncicom
User Manual Version 4.07
Audio settings
Change the Input source to "Mic".
The Microphone Gain might need adjustment later on depending on the used microphone.
Same goes for Volume depending on the speaker.
Quality and Sampling frequency settings can be increased to lower the playback delay but this will increase
network traffic slightly.
Streaming settings
The door station is set to auto answer for 12 seconds (Post Trigger Play) using UDP broadcast.
When receiving a stream, 4096 Bytes will be buffered first before playing it back over the speaker. Lower this
value to minimize delay, increase this value to prevent dropouts.
The stream will be transmitted using a UDP broadcast on port 3030.
BARIX AG
| 28. Jan. 2014 | Application notes | Page 43/54
Summary of Contents for Annuncicom
Page 2: ......
