Annuncicom
User Manual Version 4.07
Audio settings
Change the Input source to "Mic".
The Microphone Gain as well as the Volume might need adjustment later on depending on the microphone
and speaker used.
Quality and Sampling frequency settings can be decreased to lower the network traffic but this will increase
the playback delay.
Streaming settings
No changes needed.
Streaming mode is set to talk when the TALK command is activated (i.e. TALK button pressed).
Post Trigger Play is set to talk on for 1 second after the button has been released. This prevents cut offs.
When receiving a stream, 4096 Bytes will be buffered first before playing it back over the speaker. Lower this
value to minimize delay, increase this value to prevent dropouts.
The stream will be transmitted using a UDP broadcast on port 3030.
BARIX AG
| 28. Jan. 2014 | Application notes | Page 39/54
Summary of Contents for Annuncicom
Page 2: ......
