56-101-01178 Revision K
Page | 29
Figure 32
ATP Leak Test - Parameter Profile Screen
Figure 33
ATP Leak Test Results Screen
E. Go To Ground
: This function will take the Test Set back to Ground (ambient barometric
pressure altitude) and CAS = 0 Kts. Go To Ground can be selected while operating in
Leak Measure or Control mode.
Note:
During Power ON initializations, the Test Set measures ambient barometric pressure
“GROUND” and stores it in a temporary memory. When the user selects Go To
Ground, the Ps Target = ambient pressure altitude. After completion of Go To
Ground (Unit Safe at Ground) the Test Set measures ambient barometric pressure
again and that becomes the latest ambient barometric pressure altitude at ground.