Manual 2100-614I
Page
17 of 43
h. Comfort Mode
i. Restore System Defaults
j. Reset Controller. There are built-in routines
to prevent the controller system from getting
“locked up”, but this also allows a manual
remote reset as a backup before having a
service call to the site.
Notes Page
This screen provides a place to leave notes about the
site for the technician or engineer.
Users Page
1. The designated Admin person can assign up to
nine additional users and set up as Admin, Write or
Read authority.
2. User name and password must be assigned. Each
must be at least three characters long and are case
sensitive.
3. Only “Admin” can add, change or delete users and
has access to all controller pages.
4. “Write” can make changes to the controller settings
and operating characteristics and has access to
only Log In, System Status, Setpoints and Log Out
pages.
5. “Read” can only view Status and Setpoints pages
and cannot make any changes.
Notification Setup Page
The notification setup page is used to determine which
alarms are remotely communicated to the offsite
monitoring systems. The CB5000 supports email
notifications as well as IPV4 and IPV6 SNMP Ver. 2
traps.
Remote SMTP server information and a valid email
address are required.
For the email notifications to work, the corresponding
SNMP traps must be enabled, even if SNMP traps are
not going to be used.
SNMP traps may be sent to up to four IP addresses
to both IPV4 and IPV6 addresses. The addresses are
configured remotely by the IT professionals monitoring
these traps. The IP addresses are configured in the
MIB file using a standard MIB browser. Each of the
traps must be enabled and a valid IP address saved
in the MIB file. MIB files are available on the Bard
website at http://bardhvac.com/software-download.
Log Out Button
1. Clicking this button will automatically log off the
controller remote access.
2. To log back in will require entering assigned IP
address into the browser and entering valid user
name and password.
MC4000 HVAC Monitor / Controller
MC4000 HVAC Monitor / Controller
