Barco UDX, User Manual

Page: 59 / 236

59 R5906112 /15 UDX
The table below describes the different Stitch Layouts and scan directions.
Type of layout Description
Available connectors Mode
1
: Single
A single source is displayed in
full screen Quad Combo input:
•
SDI (4x)
• HDBaseT (2x)
• DisplayPort
• HDMI
Quad DP 1.2 Input:
•
DisplayPort (4x)
Mono / Active
stereo
1 2
: Dual 1 x 2
Two inputs are required. The
sources are displayed next to
each other. Quad DP 1.2 Input:
•
2x DisplayPort
Mono / Active
stereo
1 2
3 4
: Quad 2 x 2
Four inputs are required. The
sources are displayed in four
quadrants. Quad Combo input:
•
4x SDI input
Quad DP 1.2 Input:
•
4x DisplayPort
Mono / Active
stereo
1 2 3 4
: Quad 1 x 4
Four inputs are required. The
sources are displayed next to
each other. Quad DP 1.2 Input:
•
4x DisplayPort
Mono / Active
stereo
1
: 2 x single
Two inputs are required. The
sources are displayed one
above the other. Quad DP 1.2 Input:
•
2 x DisplayPort
Passive stereo
1 2
: 2 x Dual 1 x 2
Four inputs are required. Two
sources are displayed next to
each other, while the other two
are displayed above the first
two Quad DP 1.2 Input:
•
4x DisplayPort
Passive stereo
Even if passive stereo sources are selected, the output of this projector can only be in either 2D or
in Active Stereo. Advanced image processing will make sure a passive stereo image is properly
converted to active stereo.
How to select a stitched layout
1. Press Menu to activate the menus and select Source .
Image 6–3 Main menu, Source
2. Press OK .
The Select Source menu is displayed with the actual available sources filled out, including all available
stitched layout options.
GUI – Source