Barco – TransForm A – DOC-3358-2 – service manual – Revision 06 – March 2007
__________________________________________________________________________
1-2
1.1
How this manual is organized
This manual describes service and maintenance operations for T
RANS
F
ORM
A - Workstation for Windows and for
T
RANS
F
ORM
A - X Terminal from Barco (in the following simply referred as T
RANS
F
ORM
A as long as it is not neces-
sary to distinguish between both types of devices). It is divided into four chapters:
•
Introduction
explains the structure of the manual itself and the used typographic styles and symbols. Safety information is
provided concerning the maintenance of T
RANS
F
ORM
A from Barco.
•
Examining
describes the housings of T
RANS
F
ORM
A and access into the housings.
•
Maintenance
describes servicing and maintenance operations for T
RANS
F
ORM
A.
•
Inserting additional hardware
describes how an extension of the device can be made
•
Troubleshooting
gives advice, how to contact the Barco support.
Chapters, pages, figures and tables are numbered separately. Chapters are indicated by a »point syntax«, e. g.
2.2.3
, pages by a »dash syntax«, e. g.
2-1
, as figures and tables are, e. g.
figure 2-4
.
References to the T
RANS
F
ORM
A user’s manual refer always to the user’s manuals
T
RANS
F
ORM
A - Workstation for
Windows or to the user’s manual T
RANS
F
ORM
A - X Terminal, depending on the device you have. If there is a refer-
ence to only one of these two manuals, then the respective manual is explicitly mentioned.
