Barco – TransForm A – DOC-3358-2 – service manual – Revision 06 – March 2007
__________________________________________________________________________
2-7
2.2.2
The back of the OmniBus A12
11-22
9
10
25
24
23
23
26
9
link interface card
10
CPU board
11-22
Barco’s expansion cards
23
ventilation slots
24
mains connection of power module
25
LED: power status of power module
permanent red
standby mode: Power applies at the module but the device is not
switched on.
permanent green
power module OK, power output OK
off
power connection is interrupted
26
connection for equipotential bonding conductor
Figure2-8
Rear view of O
MNI
B
US
A12
To protect the O
MNI
B
US
A12
from overheating, the air supply openings in the case shall be
kept free of obstructions!
To disconnect the O
MNI
B
US
A12
from the power supply all power cords have to be pulled of
the mains connection [24]. Therefore the back panel has to be easily accessible!
